The most affordable, high-quality, auto-tool-change system available. Compact Auto-Tool-Change (ATC) machine with standard acoustic cabinet. Mechanical ATC mechanism for superior cost performance.

Working area : 320mm x 220mm

Eleven Auto Specs :

Minimum pattern width (mm)		0.1 (4 mil)
Minimum milling width (mm)		0.1 (4mil)
Working area (mm)		320 x 220 x 45 (13" x 9" x 1.77")
Table size (mm)		370 x 290 (15" x 11")
Control axis		X, Y, Z
Control motor		Stepper Motor
Resolution (µm) *4		10 (0.4 mil)
Maximum travel speed (mm/sec.) *1		55 (2.2")
Spindle speed (min-1) Spindle motor		5,000 - 41,000 DC Spindle
Drilling (mm)		0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min.) *2		60 (80 *3)
Maximum drilling stroke (mm)		45 (1.77")
Tool change		Automatic / 10
Milling Method	Absolute	No
	Incremental	Yes
Compressed air (Mpa)		---
Power consumption		100 / 240 V, 50-60 Hz, 200 VA
Machine dimensions W x D x H (mm)		570 x 600 x 450 (22" x 24" x 18")
Machine weight (kg)		Approx. 70 (155 lbs)
Interface		One USB or RS-232C port (Additional USB required with optional fiducial camera)
Standard equipement		Dust proof, Acoustic cabinet 10 Pieces Auto Tool Change Software Conversion & CAM
Options and accessories		Fiducial positioning camera 30x Vacuum table (VT-ABS) Tool protrusion equipment Ring-setter/ Precision ring-setter (manual) Drilling ring Connecting Cable (USB) Software EASY CAD, Correct DXF Vacuum cleaner
Starter kit (Option)		Connecting Cable (RS232C) Magnifying glass 10x Extention hose for Vacuum cleaner Tools: End mills Drill bit Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.